EKF - Short Profile
EKF - Short Profile


SBF-CROSSOVER

CompactPCI® Serial • Multi I/O Card

Quad USB 3.0 • Dual GbE • RS-232 • PE Mini Card Socket
HTML documents available here

PDF documents available here

SBF-CROSSOVER
Description
Ordered List
Product Information
Block Diagram
General Information
CompactPCI® Serial


SBF-CROSSOVER
Download area for drivers

Drivers
USB | Ethernet | UART

Download photos in print quality

Photo Gallery

1 | 2
© EKF • Images are displayed in a secondary browser tab or window

SBF-CROSSOVER

CompactPCI® Serial • Quad Port USB 3.0 • Dual GbE

Option 8HP Front Panel w. RS-232 or CAN FD


The SBF-CROSSOVER is a peripheral slot card for CompactPCI® Serial systems, equipped with four individual USB 3.0 compliant controllers, and two Gigabit Ethernet NICs, all wired for front I/O. In addition, a PCI Express® Mini Card socket is provided on-board, which can be used e.g. for a fieldbus I/O module such as CAN FD. Furthermore, a quad port UART is available for RS-232 or RS-485 communication.


The SBF-CROSSOVER can be installed into any PCI Express® enabled peripheral slot of a CompactPCI® Serial backplane (PCIe® x4 or fat pipe slot recommended for optimum performance). All on-board devices are PCI Express® based. The front panel USB and Ethernet jacks are wired to individual controllers each, thus achieving the full data throughput on all connectors concurrently.

SBF-CROSSOVER


SBF-CROSSOVER
Summary of Features

General
  • PICMG® CompactPCI® Serial standard (CPCI-S.0) peripheral slot card
  • Single Size Eurocard 3U 4HP 100x160mm2
  • Option 8HP front panel width
  • CPCI-S backplane connector P1
  • PCIe x 4 upstream - Gen2 (5GT/s) required for optimum performance

PCI Express® Interface
  • PCI Express® 9-port 12-lane packet switch PEX8614
  • Upstream port: PCI Express® x4 Gen2 (5GT/s) supported
  • Downstream ports: 8 x PCIe® x1 (4 x USB controllers, 2 x Ethernet NICs, 1 x Mini Card socket, 1 x UART)

USB Interfaces
  • 4 x Texas Instruments PCI Express® dual port USB 3.0 controller TUSB7320
  • USB 3.1 Gen1 (formerly USB 3.0) xHCI (eXtensible host controller interface) SuperSpeed supported
  • USB 2.0 high-speed, full-speed, low-speed supported
  • 4 x front panel Type A USB 3.0 host connectors
  • VBUS (+5V) 1.5A high current power switches assigned to front panel connectors
  • Option on-board Type-A connector, suitable for on-board USB stick
  • USB 2.0 wired to PCIe® Mini Card socket

Networking
  • Two networking interface controllers (NIC), 1000BASE-T, 100BASE-TX, 10BASE-T connections
  • Intel® I210-IT -40°C to +85°C operating temperature GbE controllers w. integrated PHY
  • IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
  • IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensitive streams
  • IEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronization
  • Two GbE ports via RJ45 front panel jacks (option 2 x M12-X connectors with mezzanine module P01)

UART
  • Diodes® (Pericom®) PCI Express® quad port UART PI7C9X7954
  • High performance 950-class UART
  • 16C550 software compatible
  • 128-Byte FIFO for each transmitter/receiver
  • Baud rate up to 15Mbps
  • XON/XOFF in-band flow control
  • CTS/RTS or DSR/DTR out-of-band control & driver enable signal for PartyLine operation
  • Data frame 5, 6, 7, 8 and 9 bits
  • Clock prescaling 4 to 46
  • Windows® WHQL device driver support
  • Two on-board RS-232 transceivers MAX3243, pin headers suitable for attachment of D-Sub 9-pin connectors by means of micro-ribbon flat cable
  • Two UART channels wired tor pin headers suitable for SU*-series modules (isolated RS-232 or isolated RS-485)
  • Custom specific F/P design for additional D-Sub or Micro-D connectors (8HP or wider)

PCI Express® Mini Card
  • PCI Express® Mini Card socket, full-size or half-size modules
  • Micro SIM card holder associated (15mm x 12mm ETSI TS 102 221 V9.0.0, Mini-UICC)
  • PCI Express® Mini Cards of both styles supported: USB and PCIe® based
  • Suitable for wireless applications
  • Suitable for fieldbus modules e.g. CAN-FD, and industrial Ethernet modules (real time networking)
  • Custom specific F/P design for additional pigtail SMB antenna connectors (8HP or wider)
  • Custom specific F/P design for non-radio applications e.g. CAN-FD (8HP or wider)

Applications
  • Mixed I/O: USB - Ethernet - UART - fieldbus or wireless
  • Flexible usage by means of Mini Card socket (PCIe® or USB module)
  • Data acquisition, data translation, gateway
  • Fieldbus or real time networking
  • IIOT, edge computing

Environment & Regulation
  • Designed & manufactured in Germany
  • ISO 9001 certified quality management
  • Long term availability
  • Rugged solution (coating/sealing available on request)
  • RoHS compliant
  • Operating temperature: -40°C to +85°C (industrial temperature range)
  • Storage temperature: -40°C to +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% RH non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • MTBF 24.6 years
  • EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)

SBF-CROSSOVER - Simplified Block Diagram


SBF-CROSSOVER - Simplified Block Diagram

SBF-CROSSOVER

SBF-CROSSOVER
Ordering Information
Please refer to List 21 for popular SKU
EKF is an ISO-9001 certified company
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Phone +49 (0)2381/6890-0 • Fax +49 (0)2381/6890-90 • E-Mail